tampa bay
Getting stuck in traffic near the Skyway Bridge is a headache, but coming home to a hidden mold problem is a nightmare. In Tampa Bay, the heat and humidity are constant. Water does not just come from rain. It creeps behind your walls and sits under your floorboards without you ever knowing.
A standard home inspection relies on what a person can see. That is only half the story. Infrared technology finds the moisture and electrical hot spots that the human eye simply cannot find.
Our inspections give you the full picture so you can protect your home and your wallet.
Why Inspect
A professional home inspector uses infrared cameras to detect temperature variations behind walls and ceilings. In the Tampa Bay area, this technology is vital for identifying hidden moisture from humid Gulf air or tropical storms.
It helps make sure that the structural integrity and indoor air quality of your home stay in good shape.
Thermal imaging is like a superpower for a home inspector. We look for thermal anomalies. A cold spot often means there is water where it should not be. A hot spot can mean an electrical circuit is working too hard and might start a fire.
Did you know that quality infrared cameras can detect temperature changes as small as 0.1 degrees Celsius? This tiny difference is enough to find a leak that has not even made a visible stain on your ceiling yet.
Moistures
Infrared thermography is the best way to find moisture intrusion in Florida homes. By tracking how water cools down as it evaporates, we can find roof leaks and plumbing failures before mold starts to grow.
This protects your family and keeps you from paying for expensive repairs in wet areas like Clearwater and Tampa.
When water gets into your home, it creates a cooling effect. On an infrared screen, these wet spots show up as dark blue or purple. This allows us to follow the trail of water back to the source. It might be a small gap in the roof shingles or a tiny crack in the stucco.
Finding it early means you fix a small leak instead of replacing a whole wall.
Feature | Standard Visual Inspection | Infrared Thermal Inspection |
Detection Method | Looking for stains or soft spots | Sensing heat and moisture patterns |
Wall Coverage | Only sees the surface | Sees temperature shifts behind the wall |
Accuracy | Can miss early leaks | Catches leaks before they stain |
Electrical Check | Basic visual look at wires | Finds hidden heat in breakers |
Pests like termites and carpenter ants thrive in Tampa Bay’s humid air. Infrared technology detects active infestations hidden deep inside walls by finding the heat signatures and moisture nests they leave behind. This allows us to catch structural threats in neighborhoods like Tarpon Springs or South Tampa without tearing into your drywall.
Florida is a high-risk zone for property damage. Termites alone cause billions in costs each year. Using infrared technology acts as a shield for your home and is one of the smartest ways to avoid a massive repair bill.
Living near the Suncoast means your air conditioner works hard every single day. Our infrared inspections find air leaks around windows and doors in neighborhoods like Hyde Park and Old Northeast.
By fixing these energy losses, you can lower your monthly cooling bills and stay comfortable during a long August heat wave.
Every house in Tampa is built differently. We see insulation gaps in the historic bungalows of St. Pete and ductwork leaks in the new homes in Westchase. If your AC is running all day but the house still feels warm, you probably have cool air escaping into your attic.
We use our cameras to find those leaks so you can seal them up. This keeps your home cool and helps your HVAC system last longer.
We are a local small business, not a national chain. We know the streets from the Tarpon Springs Sponge Docks down to the neighborhoods near Bayshore Boulevard. We understand what the Florida humidity does to a house.
We have seen how tropical storms can push water into places you would never expect.
Our team cares about this community because we live here too. We want to make sure your home is safe for your kids and your pets. When we do an inspection, we take our time. We treat your home like it belongs to our own family.
We want to give you the facts you need to make a smart choice about your property.
why choose
Robbins Services
No, the camera does not see through the wall like an X-ray. It sees heat radiation on the surface. If there is water or a hot wire behind the wall, it changes the surface temperature. That is what the camera picks up.
The camera finds the moisture that causes mold. Since mold needs water to grow, finding the wet spots is the most effective way to stop mold before it starts or find out where it is hiding.
Finding a hidden roof leak or an electrical hot spot can save you thousands of dollars in repairs. It is a small price to pay for catching a major problem early.
We check your electrical panel for hot spots. These are often caused by loose wires or circuits that are carrying too much power. Finding these can prevent a house fire.
Many inspectors only do a visual check. We use infrared tools to give you a much better report. It is a specialized service that provides the most detail possible about your home.
Do not let hidden problems turn your Florida dream home into a money pit. Robbins Home Inspections is here to give you the truth about your property. We serve all of Tampa Bay with the best technology and local expertise.
Call us today to schedule your infrared thermography inspection.
Let us help you see what others miss.
